ASTM E 283-04

TEST PURPOSE: To determine the rate of air loss through windows, doors and curtain wall systems under a specified pressure differential. This test is performed at 1.57 PSF or 0.3 In/WC. NOTE: This test was also performed at 1.19 In/WC or 6.2 PSF.
View test data (Word .doc)

ASTM E 331-00

TEST PURPOSE: To determine resistance to water penetration under uniform static air pressure differences. The test pressures shall be specified based on the building exposure, if no pressure is specified a pressure of 2.86 lbs/ft2 shall be used, and last for a single duration period of 15 minutes. For the duration of the test water will be supplied at a rate of 5 U.S. gal/ft2 per hour.
View test data (Word .doc)

ASTM E 547-00

TEST PURPOSE: To determine resistance to water penetration under cyclic uniform static air pressure differences. The test pressures shall be specified based on the building exposure, if no pressure is specified a pressure of 2.86 lbf/ft2 shall be used. For the duration of the test water will be supplied at a rate of 5 U.S. gal/ft2 per hour.
View test data (Word .doc)
» Contact BEI

» About BEI

» Home



Specification Documents:
   Fluid-Applied Weather & Air
      Barrier System

   Wet-Flash® PM-7000
   Wet-Flash® WS-7100

Data Sheets:
   Wet-Flash® PM-7000
   Wet-Flash® WS-7100
   Wet-Flash® FR-7200
   Wet-Flash® EWS-7300
   Wet-Flash® WR-7350
   Wet-Flash® SWB-7500
   Wet-Flash® SP-7700

MSDS:
   Wet-Flash® PM-7000
   Wet-Flash® WS-7100
   Wet-Flash® FR-7200
   Wet-Flash® EWS-7300
   Wet-Flash® WR-7350
   Wet-Flash® SWB-7500
   Wet-Flash® SP-7700

Application Guide:
   Weather Resistive Barrier
   Windows Install
   Window Repair

Can't read PDFs? Click here to download Adobe Acrobat Reader.




Home | Wet-Flash® Products | Installation/Application Guide | Test Chamber | About BEI | Contact BEI | Distributor List
©2006 BEI, Inc. All rights reserved. Design by Site Specific.